Thankfully, there is a wealth of information available online that can help you to do just that. In fact, as you do your research, you will most likely find more than one method. With that being said, here is a step-by-step guide that’s designed to walk you through the process with ease.
What Types of Supplies Needed to do this Job
- Safety Glasses / Safety Goggles
- Pick Tools
- Drill Driver
- Drill Bit
- Center Punch Tools and hammers
Outline of Steps to be Taken and How to break into a keypad door lock
- Step 1: Make a small hole with your drill at the bottom of the lock of the door
- Step 2: Insert the tool that is shaped like a pick inside of the hole
- Step 3: Pull the door open after completing step 2
Supplies Required for Each Step
To crack a keypad door lock successfully, you will need to invest in a number of different types of tools. In fact, unless you have these items in your toolbox at home or in your apartment, you may want to buy them at your local hardware store. Or, based on your situation, you may be able to borrow the tools and supplies that you need from one of your neighbors. Either way, here are some of the supplies that you will need to break into a keypad door lock.
Safety Glasses / Safety Goggles
As mentioned earlier, before you start this process, you need the right tools and accessories. For instance, one of the most important accessories that you can buy is a pair of safety glasses or safety goggles. These accessories are used for precautionary measures, particularly for anyone who is concerned about protecting your eyes from injury.
To protect your eyes from splashes, dust, and vapor, you will need a pair with the following features:
- Fit tightly over the yes
- Cover the entire facial area
- Big enough to fit over corrective glasses
- Vented goggles
Pick Tools
Some tools are great for handling different types of projects, minor emergencies, and other how to break into a keypad door lock tasks that are difficult to do. For example, the pick tool usually comes in handy for a number of different reasons and purposes, specifically since the hooks are attached securely to the pick, and can be used to maneuver things around easily.
This is primarily because the pick tool can be used to clean out crevices and grooves that dirt lies between. The shape of this tool is also thinly designed so that the user can pierce into a small hole without breaking or bending its materials. It is also important to note that many people use the pick tool instead of thin metal wires or paper clips to lift out particles of dirt, debris, and other tiny objects.
Drill Drivers
Another tool that you will need is a drill driver. Since this device has been designed to drill holes in a wide range of different materials such as plastics, wood, and metal, most people prefer a power drill driver to break into a keypad door lock. The tool that you select may also be equipped with a clutch that makes it easy to navigate the drill clockwise.
Drill Bits
In addition to buying a drill driver, you will also need a drill bit kit. Fortunately, drill bits are not difficult to find, specifically if you know what kinds of material that you will be working with. In fact, here are some of the most common materials used in these types of projects.
- Ferrous materials (i.e. stainless steel or iron)
- Non-ferrous materials
- Carbon steel
- Aluminum
- Carbide
- Zinc
- Carbon
The size of the bits can vary. However, it must be the exact size of the hole that you expect to make (i.e. 1/4th of an inch or 1/16th of an inch).
Center Punch Tool and Hammer
To complete this job, you will need to invest in a center punch tool and hammer. This tool has been designed with a metal rod and point that is sharp to the touch and feel. You will use this tool to keep the drill from veering off, particularly when it pieces thru the material. Many people use these tools when they are creating holes that are deeper than the drill allows. Alternatively, the center punch tool and hammer usually substitute for a small mallet.
Step-by-Instructions that Guide You on How to Break into a Keypad Door Lock
Step 1: Put Your Safety Glasses / Safety Goggles on
The first step in this process is to put your safety glasses / safety goggles on your face. These safety personal protective equipment will help to protect your eyes from dirt, debris, and any other particles that can cause your face or eyes any type of injury.
Step 2: Drill a small hole in the keypad door Lock
Drill a small hole in your keypad door lock. In order to complete this step properly, you will need to measure and mark the exact spot place to place a small hole. This small hole should be made at the bottom of the keypad door look.
Step 3: Use Your Center Punch and Hammer to stabilize the drill driver
To make sure the small hole in the keypad door lock is placed in the right spot, use your center punch and hammer to keep the drill from moving from side to side or wandering. This part of the process is designed to assist with creating a small dimple.
Step 4. At the bottom of the keypad door lock, drill a Small Hole
The small hole that you are making should be positioned at the bottom of the keypad door lock. This small hole can be placed on the right, the left, or in the middle.
The place that you select will depend on the design of the keypad door lock. For instance, some keypad door lock mechanisms may be positioned in the middle, while others are positioned on the left or on the right. However, the most common location for the keypad locking mechanism is at the bottom.
Step 5: Drill the Small Hole
Once you have found the right position for the small hole on the keypad door lock, use your drill driver to drill the hole. Also, to prevent the drill from overheating during this process, drill the hole at a slow speed.
Step 6. Insert the pick tool inside the Small hole
After you have drilled the small hole at the bottom of the keypad door lock, the next step is to insert the pick tool inside of the small hole.
Step 7: Search Around for the Lock Mechanism
After inserting the pick tool inside of the small hole, you will need to search around for the keypad’s door lock mechanism.
In order to do this properly, you can use your fingers to feel the sections of the lock where there is pressure. You should be able to find this location on the lock within a few seconds.
Step 8: Open the Door Lock
Once you have found the location where there is pressure (i.e. locking mechanism), you can push the pick in a downward motion. This action will open the door lock.
Step 9: Open the Door
If your door has been designed with a thumb-turner latch, the door will open up once you have turned it. On the other hand, if the door does not open right away, try repeating step 7 again (i.e. search around for the locking mechanism).
Consider Other Alternatives Before Using These Steps
Before using these steps to break into your keypad door lock, you need to consider all of your other options first, including the following:
- recalling the keypad code by thinking of the most logical series of numbers (i.e. birth dates of people you love).
- opening the lock with a bypass key
- talking with an apartment manager that has access to the keypad door lock
Conclusion
There is a lot of valuable information available online today on topics like ‘how to break into a keypad door lock.” Specifically, as it relates to people gaining access to keypad door locks with a step-by-step guide. From identifying the list of tools and supplies needed to break into a keypad door lock to outlining simple step-by-step instructions on how to do it correctly, you can find everything that you need to know.
Also, once everyone knows exactly what types of supplies are needed, and what to do to break into their keypad locks, they will not only save time but also money. Specifically, when homeowners and apartment dwellers do not have the funds or the budget to pay for the services of a professional locksmith to do this type of job.