Site icon Safe Home Advice

How to Change Water Softener Filter for Better Home Plumbing

how to change water softener filter

How To Change Your Kinetico Water Softener Prefilter

Kinetico water systems provide you with amazingly good water quality, though some require routine equipment maintenance for optimal performance. For optimal functioning on Kinetic Water Softeners you must change the filters periodically. It prevents water from entering the water system by removing sediment or other solids from the system. Let us make modifying the Prefilters easier.

How frequently should you replace your water softener filter?

In many household appliances, a water softening device is a key component of filtered water especially for people who live in crowded areas. Water softeners remove minerals from water supply in homes. The process greatly improves quality for water and prevents numerous issues like mineral build-up at the showerhead or sink and the drying skin from hard water. Installation however, isn’t sufficient; it’ll take more than one. You also require proper maintenance of the device and replacement of the used water filters, in a timely manner.

Your Water Softener

Water softeners remove minerals like chlorine, magnesium and calcium from the water supply. This improves the taste of your water and prevents hard water problems.

Hard water causes:

So a water softener is a must have for many households. To keep your water softener working properly you need to maintain and replace filters. A whole house water filter will give you better tasting water throughout your home so it’s worth the money on it if you want better water quality.

Understanding your water softener system is key to maintenance and filter replacement. Let’s get started with the steps to change your water softener filter.

Before You Begin

Before you start the filter replacement process you need to prepare your system:

Find the by-pass valve installed with your water softener. This valve is usually located near the main unit. Turn the handle on the by-pass valve to show the yellow section in the opening. This puts water flow through the system in by-pass mode.

Note: By-pass valves and valve styles may vary depending on your water softener model. Check your user manual if you’re not sure where or how to operate the valve.

Depressurize the system. This step is required to change the prefilter and may not apply to all Kinetico Superkits. To do this:

By following these steps you’ll be ready for a smooth filter replacement and minimal leaks and water spillage.

Inspect and clean your sump

Once discarded water can enter the tank and inspect for sediments and other materials in the bottom. Easily remove the sumper. Check your sump seal and O-rings before inserting a fresh or cleaned replacement cartridge. Ensure that the o-ring is cleaned properly. Avoid petroleum jelly and any other lubrication product. Get in touch with the dealer service side to find out what you need.

Replace Filter Cartridge

Now that you’ve prepared your system it’s time to replace the filter cartridge:

Remove the filter housing sump by turning it clockwise with both hands. This job may take some effort if the system isn’t fully depressurized.

Caution: The housing sump will be full of water pressure, so be careful not to spill.

Remove the used filter cartridge by turning it clockwise and throw it away.

If your filter cartridge is reusable:

Place the new or clean filter cartridge into the top of the filter housing. Turn the screw on the cartridge counter-clockwise until it stops. This will ensure it’s seated properly.

Turn On Your Water Softener

Now that you’ve replaced the filter cartridge it’s time to turn your water softener back on:

Important: Make sure the arrows on the filter sump and housing are aligned for best performance.

Maintenance

This will ensure your water softener keeps providing clean drinking water for your family and home.

Whole House Water Filter

If you want to improve water quality throughout the pipes and your whole home consider upgrading to a whole house filter:

Troubleshooting and Support

Even with regular maintenance you may still have issues with your water softener. Here are some troubleshooting tips:

Done

Changing the filter in your water softener is key to keeping water quality and preventing mineral buildup and bad taste. Maintenance and filter replacement will extend and protect the life of your water softener system.

Consider a whole house water filter for even better water quality in your home. Follow these steps to install and maintain your system and your water softener will keep working and providing water for your whole household.

Exit mobile version